EasyManua.ls Logo

Speler SP-LED32 - Maintenance; Specifications

Speler SP-LED32
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Be sure to press POWER button to set the player to the standby mode and disconnect the
power plug before maintaining the player.
Wipe the player with a dry, soft cloth.
If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak
soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth.
Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use
compressed air to remove dust.
Display Device
32 inch LED TV
Resolution
1366×768
Pixel Pitch
0.51075(H)×0.51075(V) mm
Luminance
200 cd/m
2
(+/-10%)
Contrast Ratio
1400:1
Aspect Ratio
16:9
Response Time
14 ms
Viewing Angle
178(H)/178(V)
Visible Range
697.7(H)×392.3(V) mm
Life Time
30,000 Hrs
Multimedia Playback
Format
Movie: AVI, MKV, MP4, MPEG 1/2
Music: MP3
Photo: JPG
Power Source
AC 100-240V, 50/60Hz
Power Consumption
<60W
Operation
Temperature
-5 to 45
Measurement
732(W)×200(D)×473(H) mm
Weight
Approx. 4.3 Kg
Specifications are subject to change without notice.
MAINTENANCE
SPECIFICATIONS

Related product manuals