2
II. FEATURES AND MEASUREMENT FUNCTIONS
• Precise True RMS circuitry
• 5999 Count Backlit Screen
• Data hold capability to maintain reading on display
• Auto power off functionality to save battery life
• Output test feature for an oscilloscope
• AC/DC Current
• AC/DC Voltage
• Resistance
• Continuity
• Diode Test
• Frequency
• Duty Cycle
• InRush Current
• Relative Measurement
• Low Pass Filtering
Validity of keys
III. SAFETY WARNINGS
• This instruction manual contains warnings and safety rules which must be observed by
the user to ensure safe operation of the instrument and retain it in safe condition.
• Read through and understand the instructions contained in this manual before using the instrument.
• Keep the manual at hand to enable quick reference whenever necessary.
• The instrument is to be used only in its intended applications.
• Understand and follow all the safety instructions contained in the manual.
• It is essential that all safety instructions are adhered to.
• Failure to follow the safety instructions may cause injury, instrument damage
The symbol indicated on the instrument means that the user must refer to the related parts in the manual for safe
operation of the instrument. It is essential to read the instructions wherever the symbol appears in the manual.
DANGER is reserved for conditions and actions that are likely to cause serious or fatal injury.
WARNING is reserved for conditions and actions that can cause serious or fatal injury.
CAUTION is reserved for conditions and actions that can cause injury or instrument damage.
SELECT MAX/MIN HOLD INRUSH REL ZERO
Ã
x x
Ã+LO x x
A
x x x
3
˜
V
x x x
˜
V
+LO x x x
V
x x x
Ω x x
x x
x x
Hz
3
x x
3
x x x
Not all the key operations at a gear are valid. The corresponding operation function can be selected or instrument under sleepstate be awakened only by valid key
operations, as shown.
To Next Page
Loading...
Need help?
General
