Sperry instruments DSA660 User Manual

1
OPERATING INSTRUCTIONS
Digital Clamp Meter
DSA660
Rotary Switch
NCV Non-Contact Voltage Measurement
Continuity Test/Diode Test/
Resistance Measurement
DC Voltage Measurement
AC Voltage Measurement
600 AC Current Measurement
60 AC Current Measurement
OFF Power Off
A
400A
A
A
A
400A
A
A
A
400A
A
A
A
400A
Function Selection
BUTTON OPERATION PERFORMED
SELECT
Switch between Continuity, Diode, and Resistance at the measurement settings
REL
Display the difference between the measured value and the stored value
on the LCD screen
Hz/DUTY
Measure Frequency / Measure Duty Cycle
MAX/MIN
Retain the highest or lowest measurement value being recorded
HOLD/
Retain the measured value on the LCD screen / Turn on display backlight
Read this owners manual thoroughly before use and save.
IMPORTANT: RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage. If you find damage, notify the carrier at once.
Shipping damage is NOT covered by warranty. The carrier is responsible for all repair or replacement costs resulting from damage in shipment.
LCD
COM
Input
MAX/MIN
HOLD / Backlight
Rotary Switch
Function
Relative
Clamp
Trigger
Frequency / Duty Cycle
Figure 1

Sperry instruments DSA660 Specifications

General

Brand	Sperry instruments
Model	DSA660
Category	Measuring Instruments
Language	English