SANITIZING
Below are Sphero’s tips on how
to clean and properly disinfect
Sphero Mini.
1
Have the proper cleaning products, e.g. disposable
disinfecting wipes (Lysol or Clorox or similar brands are
best) or spray, paper towels (if using a spray) and
disposable gloves.
2
Remove Mini’s outer shell and wipe it inside and out.
Allow to dry and place back on the inner robot ball. You
can also wipe down the inside, but make sure no liquid
gets inside the charging port or other openings.
3
Wipe down Mini’s outer surface, anything that hands have
touched
4
Allow Mini to dry completely before plugging it back into
its charger.
To Next Page
Loading...
