SPI ABSOLUTE DIGITAL CALIPER User Manual

ABSOLUTE DIGITAL CALIPERS
swissprec.com
1 LCD Display 7 Origin Button
2 Locking Screw 8 ON/OFF Button
3 mm/in Switch Button 9 Step Measuring Faces
4 Data Output Port 10 Outside Measuring Faces
5 0/ABS Switch Button 11 Inside Measuring Faces
6 Depth Measurement 12 Main Scale
ABSOLUTE DIGITAL CALIPERS
OPERATION MANUAL
SPI 30G04
IMPORTANT NOTICE
Avoid exerting excessive force
when measuring as it may cause
an incorrect reading and
deformation of the measuring
jaws.
Technical Specifications
• Resolution: 0.01mm /.0005”
• Power: Battery 3V, CR2032
• Measuring speed: Unlimited
• Working temperature: 0~+40℃
• Relative humidity: <80%
Specifications:
Range Resolution Accuracy +/-
0~150mm / 0~6”
0.01mm
/.0005”
0.02mm/.001”
0~200mm / 0~8”
0.03mm/0.0015”
0~300mm / 0~12”
0.03mm/0.0015”
Battery installation: CR2032 Lithium

SPI ABSOLUTE DIGITAL CALIPER Specifications

General

Brand	SPI
Model	ABSOLUTE DIGITAL CALIPER
Category	Measuring Instruments
Language	English

Summary

Technical Specifications

Operating

ON/OFF

Turns the caliper on or off with a short press of the button.

mm/in

Selects the unit of measurement between millimeters and inches.

ORIGIN

Resets the origin zero for measurements.

ABS/INC

Toggles between absolute and incremental measurement modes.

Methods of measurement

External measurement

Measures outside work piece features using the external jaws.

Internal measurement

Measures inside work piece features using the internal jaws.

Depth measurement

Measures depth using the end of the beam and the depth bar.