In order to use Take Off and Landing event messages you must also configure and install
the Spider for Engine On and Off events.
Once you save the configuration a message will be sent to the Spider to update the firmware. The
Spider must connect to the Iridium Satellite Network in order to receive this update. We
recommend 10 minutes of connection in order to process all updates.
If you require a different event description to the ones listed above, please contact
support@spidertracks.com.
1.6.4. Testing!
To check the information you are receiving is correct, go to the History page within your account.
Select the checkbox beside the ‘test flight’ and click on the download button in the bottom bar.
The event description will show within the CSV file. The event is not currently displayed on the
maps within the Flying or History pages.
For further assistance please contact support@spidertracks.com!
To Next Page
Loading...