Spin Master Dr. Pimple Popper Pimple Pete User Manual

CONTENTS:
1 x Pimple Pete Head
1 x Spinner Base
18 x Pimples
1 x Mega-Zit Plunger
ASSEMBLY
1. Assemble Pimple Pete
Snap Head into Base.
2. Load Pimples
A. Randomly push tail of Pimples through the front of the face.
B. Pull the tail of the Pimples from the back of the face.
Place any extra Pimples back in the box.
C. The Pimples should look like this.
3. Fill Mega-Zit Plunger
4. Installing Mega-Zit Plunger
Pull back the Plunger Holder
until it locks in place.
Insert tip in water. Pull Plunger to
draw in water to
the Fill Line.
Press down on the RED
Plunger Lock Release Button
when ready to play.
NOTE: After pressing the Plunger Lock
Release Button, the Mega-Zit is ready for play.
Too much movement may cause it to burst.
Press down on the RED
Plunger Lock Release Button
when ready to play.
Plunger Holder
Fill Line
A B
C
Click!
Click!
WARNING:
CHOKING HAZARD — Small parts.
Not for children under 3 years.
!
2+
PLAYERS
AGE
5+
http://spinmastergames.com/pimplepete
For more instructions go to
Insert Plunger into the
Plunger Holder and press
down until it CLICKS.

Spin Master Dr. Pimple Popper Pimple Pete Specifications

General

Brand	Spin Master
Model	Dr. Pimple Popper Pimple Pete
Category	Toy
Language	English