Spin Master STAR WARS Disney BB-9E User Manual

INSTRUCTION
GUIDE
6+ YEARS
?
+
www.
WWW.SPINMASTER.COM
DO NOT RETURN TO THE STORE.
NORTH AMERICA – 1-800-622-8339,
CUSTOMERCARE@SPINMASTER.COM
BATTERIES
NOT INCLUDED
x
AAA(LR03)
3
x
BATTERY INCLUDED
1
Ni-MH
1800
mAh
x
BATTERY INCLUDED
1
400mAh/3.7V
Lipo
© & ™ Lucasfilm Ltd.
If normal function of the product is interrupted, radio interference may be causing the
issue. To reset the product, turn the head and body completely off, then back on. If
normal operation does not resume, change the RC Channel on the head and remote
and try again. To ensure normal performance, charge the batteries, as low batteries
may not allow full function.
T52127_0001_20087248_NEN_IS_R1(STW_Bb_9_S18)
TROUBLESHOOTING
Remove all packaging before use. Retain this information, addresses and phone
numbers for future reference. Please read User Instruction Guide for additional
important information. Content may vary from pictures. An adult should periodically
check this toy to ensure no damage or hazards exist, if so, remove from use.
Children should be supervised during play. Keep away from obstacles
and electrical hazards. Do not leave product unattended when on.
IMPORTANT INFORMATION
Always remove batteries from the controller when it is not being used for a long period of
time (controller/charger only). Wipe the toy gently with a clean damp cloth.
Keep the toy away from direct heat. Do not submerge the toy in water.
This can damage the electronics. Turn off the power on the controller
when not in use.
Fully charge the main body (NiMH battery) every 3 months for battery maintenance.
CARE AND MAINTENANCE
CAUTION: This toy contains inaccessible magnets.
Keep away from electronic and medical devices. Exposed
magnets, if inhaled or swallowed can stick together or to
other metal objects, and cause serious or fatal injury.
RESPONDS TO ENGLISH ONLY
CONDITION RED LED 1 BLUE LED 2 WHITE LED (VR) 3
Low Battery (Head) X Flashing - 1Hz OFF
Low Battery (Body) Flashing - 1 Hz X OFF
System Error Flashing - 2Hz Flashing - 2Hz Flashing - 2Hz
CONDITION RED LED 1
Head & Body Not Linked Fast Flashing
Low Battery (Body) Flashing - 1Hz
3
WHITE
HEAD
BODY
1
RED
2
BLUE
TIP: If BB-9E is acting up, try a reset. Turn body and head completely off, then turn both
power switches back on. If this does not work make sure the head and body are fully
charged then try again.
Spin Master logo & © Spin Master Ltd. All rights reserved.
Tous droits réservés.
SPIN MASTER LTD., 450 FRONT STREET WEST,
TORONTO, ON M5V 1B6 CANADA
Imported into EU by/Importé dans l’UE par
SPIN MASTER INTERNATIONAL, S.A.R.L., 20 RUE DES PEUPLIERS, L-2328, LUXEMBOURG
Customer Service: 1-800-622-8339 Email: customercare@spinmaster.com
RED
For additional help videos,
go to HeroDroidBB8.spinmaster.com
FIRST ORDER DROID
BB-9E
™
12

Spin Master STAR WARS Disney BB-9E Specifications

General

Character	BB-9E
Brand	Spin Master
Franchise	Star Wars
Product Line	Disney
Category	Toy
Material	Plastic

Summary

Troubleshooting Common Issues

Head and Body Status Indicators

Explains LED status for head and body conditions like low battery or system errors based on light patterns.

Resetting and Charging for Optimal Function

Provides steps to reset the droid and ensure batteries are charged for proper performance.

Important Information and Usage

Pre-Use Guidelines and Safety Reminders

Reminds users to retain information, check for damage, and supervise children during play.

Care and Maintenance Instructions

Cleaning and Protection Advice

Details how to clean the toy, keep it away from heat and water, and turn off the controller.

Battery Maintenance for Longevity

Advises on fully charging the main body battery every 3 months for optimal battery health.

Safety Cautions and Precautions

Indoor Use and Surface Care

Advises using the toy indoors on smooth surfaces and avoiding abrasive areas or inclines.

Adult Supervision and Damage Checks

Emphasizes regular inspection of the toy for damage and adult supervision during play.

Indicator Light Functions

BB-9E Head Indicator Lights

Explains the function of the red and blue indicator lights on the BB-9E head.

BB-9E Body Indicator Lights

Details the meaning of the white indicator light on the BB-9E body for voice command readiness.

Battery Installation and Safety

Remote Control Battery Installation

Instructions on how to open the battery door and install AAA batteries into the remote control.

General Battery Safety Guidelines

Provides essential safety information regarding battery usage, disposal, and handling.

Charging the BB-9E Body

Body Charging Procedure

Step-by-step guide on connecting the BB-9E body to the wall charger and monitoring the process.

Body Charging Indicator Lights

Explains the meaning of the red solid and flashing lights during the body charging process.

Assembly and Charging Ports

BB-9E Droid Assembly

Instructions on how to properly attach the BB-9E head to the body, ensuring a secure lock.

Droid Body Charge Port Functions

Details the location and function of the power switch and charging port on the droid's body.

Droid Head Charge Port Functions

Explains power switch, charging port, indicator light, and RC channel selector on the droid's head.

Charging the BB-9E Head

Step-by-step guide for charging the BB-9E head using the micro USB cable.

Head Charging Indicator Lights

Describes the red and green indicator lights that show the charging status of the head.

Remote Control and Operation

Remote Control Functions Overview

Identifies and explains controls on the front and rear of the remote, including levers and buttons.

Getting Started: Power On and Calibration

Guides users through powering on both the droid body and head and the initial calibration process.

Play Mode Selection

Briefly describes the three available play modes: Remote Control, Voice Command, and Follow Me.

Remote Control Mode Operation

Instructions on how to drive and steer the BB-9E using the remote control.

Voice Command Mode Usage

Explains how to activate voice command mode and lists commands for interacting with BB-9E.

Advanced Modes and Power Management

Follow Me Mode Operation

Instructions for using the Follow Me mode, including cautions for safe operation.

BB-9E Moods and Animations

Details how BB-9E displays moods and how to trigger random animations or reverse controls.

Sleep and Power Down Modes

Explains how the droid enters sleep mode and the procedure to turn it back on after power down.

Regulatory and Safety Information

FCC and IC Compliance Statements

Provides regulatory compliance information for FCC and Industry Canada regarding radio frequency energy.

Power Adapter Safety Information

Details safety precautions and guidelines for using the power adapter and transformer.

Special Battery Instructions (LiPo, NiMH)

Outlines special instructions for charging, handling, and disposing of LiPo and NiMH batteries.

Product Battery Removal Instructions

Provides instructions for adults on how to safely remove the internal battery from the product.