Spinning BIO User Manual (English)

To Next Page

OWNER’S MANUAL

BIO™

COMPUTER

BIO HR™

COMPUTER

BIO™ and BIO HR™

• Computer Monitor/Display

• (2) Triple AAA Batteries for Display

• Cadence Sensor–Includes CR2032 Battery

• (2) Zip ties for Cadence Sensor

• Round Handlebar Mount for Monitor

• Oval Handlebar Mount for Monitor

• Rubber Insert for Oval Mount

• Handlebar Mount Screw/Nut

For BIO HR™ only

• Heart Rate Strap–Includes CR2032 Battery

PARTS LIST

INSTALLING BATTERIES IN COMPUTER DISPLAY

INSTALLING MOUTING BRACKET ON BICYCLE HANDLEBARS

• Open the battery cover by exing the tab at the top as shown.

• Insert 2 Triple AAA batteries as shown. Make sure each

battery is installed with correct +/- polarity.

• Snap battery cover back into place.

If the display is only partially visible, please reset the device by

removing the batteries for at least 15 seconds and then reinstall

them. Note that previous exercise data will be lost when

batteries are removed.

• Mounting adapters for all Spinner® bikes are included with the computer.

• Select the proper mount for your bike from the list below.

• Stretch mount over handle bar in desired location and secure with

provided screw and nut. The screw and nut work with either mount.

Round adapter

For Sport, FIT, Pace, Ascent, and

Sprint Spinner® Bikes

Oval Adapter

For Edge, Aero, and Pro

Spinner Bikes

Rubber Insert

For NXT, NXT SR, and Blade

Spinner Bikes

MAD DOGG ATHLETICS, INC.

2111 Narcissus Court • Venice, CA 90291 • USA

TEL 1 800 847 SPIN (7746) • TEL 1 310 823 7008 • FAX 1 310 823 7408

MAD DOGG ATHLETICS EUROPE, BV

Industrieweg 20A • 3144 CH Maassluis • The Netherlands

TEL +31 (0) 10 590 4508 • FAX +31 (0) 10 590 0054

MAD DOGG ATHLETICS SRL

Via G. Ferraris 12 • 56121 - Pisa • Italy

TEL +39 (0) 50 314 0198 • FAX +39 (0) 50 316 3819

WWW.SPINNING.COM

Need help?

Do you have a question about the Spinning BIO and is the answer not in the manual?

Spinning BIO Specifications

General

Brand	Spinning
Model	BIO
Category	Bicycle Accessories
Language	English

Summary

Parts List

BIO™ and BIO HR™ Components

Lists components for BIO and BIO HR computers, including monitor, batteries, and sensors.

BIO HR™ Specific Components

Lists specific components for the BIO HR computer, such as the heart rate strap.

Installing Batteries in Computer Display

Installing Mounting Bracket on Bicycle Handlebars

Installing Display on Mounting Bracket

Cadence Sensor Setup and Installation

Cadence Sensor Battery Installation

How to install the CR2032 battery into the cadence sensor body and verify installation.

Mounting Cadence Sensor to Bike

Instructions for finding a location on the fork blade and securing the cadence sensor with zip ties.

Cadence Magnet Installation and Adjustment

Steps for installing the magnet on the flywheel and adjusting sensor position for accuracy.

Heart Rate Strap Setup and Use

Heart Rate Strap Battery Setup

Instructions for inserting the battery and securing the battery cover on the heart rate strap.

Heart Rate Strap Usage Guidelines

Guidance on moistening electrodes and fitting the strap for proper heart rate monitoring.

Operating Instructions

BIO™ Computer Operation

Explains the display layout and functions for the BIO computer.

BIO HR™ Computer Operation

Explains the display layout and functions for the BIO HR computer.

Auto Start/Stop Functionality

Describes how the monitor automatically starts and stops based on exercise activity.

Spinning BIO User Manual