© 2021 Mad Dogg Athletics, Inc. All rights reserved.
22
TROUBLESHOOTING
PEDAL ADJUSTMENTS
RATTLING HANDLEBARS OR SEAT POST
Make sure that the pop-pins are correctly
locked into place.
SADDLE PAIN
Check to ensure that the saddle is centered
and level. Adjust the level as necessary
using the outside bolts (shown in RED).
Remember that it does take time for a
body to acclimate to the saddle. A padded
gel seat cover and/or cycling shorts
can make your ride more comfortable.
The SPD®-compatible pedals are set for
the lowest release tension at the factory for
safety. If you would like a stronger release
tension, use a 3mm Allen wrench and turn
the adjustment screw clockwise. Adjust both
sides evenly and start with as little adjustment
as necessary until you achieve the desired
release tension.
To Next Page
Loading...
