SPINNER
®
ELITE OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
7
TOOLS INCLUDED FOR SPINNER
®
BIKE ASSEMBLY
Use the included tools for bike assembly only.
Elite
14mm Socket Wrench for Crank Assembly
14mm Crank Bolt
(Tools and Hardware)
21. Before every ride please examine brake pad, pedals and drivetrain for
signs of wear. The brake pad is a normal wear item and may need to
be replaced over time.
22. This bike is not suitable for therapeutic use and is for consumer use
only. Consult a physician prior to starting any exercise program.
23. The safety level of the bike can be maintained only if it is examined
regularly for damage and wear (e.g. brake pad, saddle, pedals,
drivetrain, etc).
24. Replace defective or worn components immediately and/or refrain
from using the bike until it is serviced or repaired.
25. Special attention must be paid to all wear components (e.g. brake pads, etc.).
26. Please adjust the handlebar and seat to your best biomechanical
positioning. Incorrect form and/or excessive training may result in injury.
27. Turn the resistance knob counter-clockwise to release the brake
before exercising.
To Next Page
Loading...
