Spinning Studio Console - Frequently Asked Questions

To Next Page

To Previous Page

SPINNING® STUDIO CONSOLE OWNERS MANUAL

Frequently Asked Questions

Which heart rate belts work with the Spinning

Studio Console?

Any ANT+ compatible heart rate belt will work with this console, and pairing

to an ANT+ belt will prevent any heart rate “crosstalk”. Any analog 5.3 KHz

heart rate belt such as Polar® Wearlink



will also pair with the this console.

We recommend the Spinning Connect



heart rate belt, as it will pair with this

console as well as BLE-receiving smart phones.

What if the console is not picking up my heart rate?

• Make sure that the belt ﬁts securely at the bottom of your ribcage

and that the sensors are slightly moistened.

• The battery in the belt may be low. Try another strap or replace the

battery/batteries inside your heart rate belt to facilitate pairing.

• Try using the Heart Rate Pairing button in the lower left for manual

pairing with the console. For ANT+ chest straps, the displayed code

will be alphanumeric. For analog belts, the code will be 4-digits and

displayed as 0000.

• Check your distance from the console during syncing.

Make sure you are 30 cm (12 inches) or less from the console.

• Press Heart Rate Pairing to start a new pairing process and delete

the existing relationship. If the process does not complete, the

previous pairing relationship will be lost.