IM-P372-27 CTLS Issue 2
10
LSB31, LSB32, LSB33, LSB34, LSB71, LSB72, LSB73 and LSB74 Limit Switch Boxes for BVA300 Series Actuators
No maintenance is required. Switch setting can be checked periodically.
After installation or maintenance ensure that the system is fully functioning. Carry out tests on any alarms
or protective devices.
LSB limit switch boxes are normally used for indicating valve open or valve closed position. They also allow
switching points to be adjustable over the full range of actuators.
There are no available spare parts for these units.
5. Commissioning
6. Operation
7. Maintenance
8. Spare parts
To Next Page
Loading...
