To Next PageTo Next Page
Need help?Do you have a question about the Spirax Sarco RIM20 and is the answer not in the manual?
General| Type | Pressure Reducing Valve |
|---|---|
| Trim Material | Stainless Steel |
| Application | Steam |
| Connection Size | 1/2 inch |
| Connection Type | Flanged |
| Body Material | Stainless Steel |
Guidance on checking components upon delivery to ensure all items are present and undamaged.
Information on obtaining support for flowmeter issues and contact details.
Overview of the RIM20 flowmeter's capabilities for process flow measurement.
Explanation of the flowmeter's working principle, including sensor measurements.
Details on how the flowmeter's sensing head and components are configured.
Specifications for compatible pipe sizes and process connection types.
Essential prerequisites for a successful and accurate flowmeter installation.
Guidelines for pipe layout to ensure optimal flow conditions and accuracy.
Detailed procedures for installing the insertion type flowmeter.
Step-by-step instructions for installation without stopping the process flow.
Procedures for installation while the pipeline is under pressure.
Installation steps specific to flowmeters with compression process connections.
Installation steps specific to flowmeters with packing gland connections.
Instructions for wiring loop-powered flowmeters, including terminal details.
Detailed instructions for connecting the flowmeter's power supply.
Wiring guidelines for the 4-20 mA analog output signal.
Guide to operating the flowmeter using its integrated display and keypad.
Procedure for powering on and initialising the flowmeter.
Instructions for navigating and interacting with the flowmeter's setup menus.
Steps for customizing flowmeter parameters and settings.
Setting up fluid properties for accurate measurement calculations.
Configuring measurement units for display and calculations.
Procedures for calibrating the flowmeter for optimal accuracy.
Overview of the HART communication protocol and its application.
Diagrams and instructions for wiring HART communication connections.
Overview of the Modbus communication protocol and its implementation.
Explanation of Modbus registers, variables, data types, and addresses.
Accessing diagnostic menus using a password for fault finding.
Interpretation of primary diagnostic parameters and values.
General guidelines and precautions for resolving flowmeter issues.
Initial diagnostic steps to perform before in-depth troubleshooting.
Diagnosing specific symptoms and identifying potential causes.
Procedure for safely replacing the flowmeter's electronic components.
Detailed technical specifications and performance data for the flowmeter.
Formulas and equations used for flowmeter calculations.
