Spirit T-COM VB - T-COMVB Call and Intercom Operations; Starting and Ending Intercom Conversations; Answering and Rejecting Mobile Phone Calls; Ending Mobile Phone Calls and Redial

To Start A Conversation Via Intercom
1. Once the two headsets are paired with each other, press the Power/Intercom
button on either receiver to begin.
2. Use the Jog wheel to increase or decrease the headset volume.
Tip: You only need to press the Power/lntercom button once to establish a
connection; conversation between the two paired headsets can now be carried
out hands free.
To End A Conversation Via Intercom
Press the Power/Intercom button on either of the receiver.
Tip: If the intercom headset is also paired with a mobile phone, the intercom
conversation will be automatically disconnected to answer the phone when there
is an incoming call. The intercom function will resume once the has ended.
To Answer An Incoming Mobile Phone Call
1.
Press the Multi-function button on the receiver while the phone is ringing.
2.
Use the Jog Wheel to increase or decrease the headset volume.
Tip:The incoming call will answer automatically once the phone has rung for 15
seconds.
Rejecting A Mobile Phone Call
When you hear the phone ringing, immediately press and hold the Multi-function
button on the headset until you hear a beep.
Ending A Mobile Phone Call
Press the Multi-function button to end the call.
Redial The Last Number
Press and hold the Multi-function button for 2 seconds or until it beeps. It will
then dial you last number called.