-4-
SUCTION CUP
OR
WINDOW ADHESIVE
MOUNT
UNIVERSAL BRACKET INSTALLATION
(Model 274-ULB21-U1)
•
The Universal Mount use two forked brackets and either a pair of suction
cups or a pair of window adhesive mounting pads (both included).
•
The Forked Brackets must be installed for both the suction cup and
window adhesive mounts.
•
Determine if you can install the Forked Brackets under your visor clips or
if you need to attach them in an alternate fashion and refer to the
appropriate section on pages 6 or 7.
The mounting instructions are divided into two separate sections. If you
are using the Universal Mount, proceed below. If you will be using one of
the vehicle specific brackets, please skip to page 9.
To Next Page
Loading...