Data di emissione: Dicembre, 2018 Revisione: 1 Pag. : 37/80
“SYSTEM OVER TEMPERATURE” alarm
A system over temperature message CUT/OUT
will appear (fig.11) as a safety precaution when
the unit has overheated to protect the
compressor.
• The system automatically goes to “OFF”
status where the compressor’s operations is
stopped, while augers will keep working to
avoid forming ice blocks.
• When this occurs a CUT/OUT message will
appear on capacitive display to alert the
operator of this condition (fig.11).
• When this alarm activates, turn off all
switches. Then determine the condition and
the necessary corrective action.
Fig. 11
To Next Page
Loading...
