EasyManua.ls Logo

Sports Attack Hack Attack - Ball Selection and Practice Tips

Sports Attack Hack Attack
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HACK ATTACK BASEBALL PITCHING MACHINE
SPORTS ATTACK, LLC. 800-717-4251 sportsattack.com
3
Hack Attack Safety Instructions
SAFETY INSTRUCTIONS (cont’d)
BALL SELECTION
Never mix leather balls with synthetic pitching machine balls.
Be careful not to mix new with old balls or balls from different manufacturers.
Balls must be consistent in type and amount of wear to produce repeatability.
Never use wet balls!
BATTING PRACTICE
The horizontal swivel lock must be securely tightened before the batter approaches the plate.
ALWAYS test and adjust the Hack Attack before a batter steps up to the plate:
1. Adjust so that Hack Attack throws a ball across the plate.
2. Throw test pitches until required velocity and break are reached.
3. Throw several pitches to verify pitch location repeatability.
DO NOT make any speed or pitch location changes while the batter is at the plate.
Batter and pitching machine operator must wear batting helmets.
Only one person at a time should operate the machine.
Always present the ball to the batter before feeding the ball into the machine.
Operator must stand behind a protective screen to prevent injury from balls off the bat.
Screen is not included with Hack Attack.
FIELDING PRACTICE
Both the elevation control and swivel lock must be released so that the throwing head
moves freely through the intended range of motion.
Never reach up chute to push ball into the throwing wheels.
Keep hands and fingers well away from the throwing wheels.
Be careful to keep all persons away from in front of Hack Attack.
For best accuracy, use dimpled pitching machine balls.
NOTE: Vertical (elevation control) must be adjusted whenever you change pitches (spins).
Knuckle Balls thrown too fast are dangerous and unrealistic!
CAUTION
PERSONAL INJURY HAZARD
ALWAYS use a protective screen
to protect the operator from
the ball off the bat. (Screen not
included with Hack Attack.)
ALWAYS wait for all three
throwing wheels to come to
a complete stop before
transporting Hack Attack, lifting
the throwing head or performing
any repairs.
ADDITIONAL INFORMATION
If you have any questions
regarding the safe operation of
this equipment, please call:
Sports Attack Customer
Service Department
Ph 800-717-4251
Fx 775-345-2883

Related product manuals