Sportsman GEN9000DF - User Manual

37 pages

Save Page as PDF

To Next Page

GEN9000DF

9000 SURGE WATTS / 7500 RUNNING WATTS

DUAL FUEL LPG LIQUID PROPANE & GASOLINE

PORTABLE GENERATOR

INSTRUCTION MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT OPERATE THIS PRODUCT!

DO NOT RETURN THIS GENERATOR TO THE RETAILER!

If you experience a problem, have questions or need parts for this product, call Customer Service at

1-866-460-9436, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE.

SEEK THE ADVISE OF A LICENSED ELECTRICIAN FOR 120V / 240V WIRING

Visit our website for Frequently Asked Questions http://sportsmanseriesbrand.com

Other manuals for Sportsman GEN9000DF

Step-By-Step Quick Start Guide2 pages

Questions and Answers

H
Haley MayJul 31, 2025
What to do if my Sportsman Portable Generator runs but does not support all connected electrical devices?
- R
  Raymond HolmesJul 31, 2025
  If your Sportsman Portable Generator runs but can't support all connected devices, it might be overloaded. Reduce the number of connected electrical devices to stay within the generator's rated wattage. Also, a short in a connected device could be the culprit; disconnect any faulty loads. A dirty air filter can also cause this issue, so clean or replace it. Finally, check for loose wiring connections behind the control panel and at the generator's end, tightening any loose screws or nuts and ensuring plug-in connectors are fully engaged.
A
Alexandra PriceAug 15, 2025
Why does my Sportsman GEN9000DF run but have no electrical output?
- J
  Joseph HerreraAug 15, 2025
  If your Sportsman Portable Generator's engine runs but there's no electrical output, begin by checking if the reset button(s) is (are) in the 'on' position. Next, inspect the wiring behind the control panel and at the generator's end for any loose connections; tighten any loose screws or nuts and ensure connectors are fully plugged in. Try using a different extension cord to rule out bad connecting wires or cables. Disconnect the current device and connect another one to check for a faulty electrical device. Inspect the carbon brushes to ensure they are making contact with the copper bands on the rotor and replace them if worn. Lastly, examine the AVR for burn spots and replace it if necessary.