EasyManua.ls Logo

SPORTSPOWER BouncePro TR-0123BGA-168 - User Manual

SPORTSPOWER BouncePro TR-0123BGA-168
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BY
14ft Classic Trampoline and Enclosure Combo Set
Assembly, Installation, Care, Maintenance, and User Instructions
TR-0123BGA-168
TR-0123BGB-168
For Customer Service, please call 1
-
866
-
370
-
2131 or visit
www.sportspowerltd.net
Monday – Friday 9:00 AM – 5:00 PM Eastern Time
Sportspower Ltd.
Level 20, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong
Corporate Office 1-800-497-6106
DO NOT attempt somersaults or flips. Paralysis or death can result if you land on your head or neck!
No more than one person on the trampoline at a time. Multiple users increase the risk of injury.
Use trampoline only with mature, knowledgeable supervision.
These instructions are important to minimize chances of injury. Please read each of them
thoroughly before you assemble and use this trampoline. Retain this manual for future reference.
Maximum weight of the user shall NOT exceed 220lbs/100kg for this product.
Trampoline must be used with enclosure that is properly installed and maintained
Question and Answer IconNeed help?

Do you have a question about the SPORTSPOWER BouncePro TR-0123BGA-168 and is the answer not in the manual?

Summary

Introduction to Your Trampoline

Product Overview and Initial Safety Advice

Overview of the trampoline, emphasizing safe use and reading instructions.

Getting Started: Pre-Assembly and Use

Pre-Assembly and Pre-Use Preparations

Essential checks and preparations before starting trampoline assembly and use.

Critical Safety Warnings and Precautions

General Danger and Warning Alerts

Details critical DANGER and WARNING alerts for safe trampoline operation.

Proper Play Conditions and Environment Rules

Guidelines for safe play environment, including weather and clear space.

User Conduct, Restrictions, and Enclosure Safety

Rules for user behavior, restrictions, and enclosure safety.

Enclosure Netting and Mat Maintenance

Netting and Pad Maintenance Schedule

Schedule for inspecting and maintaining enclosure netting and pads.

Inspecting Netting and Pad Integrity

Methods for inspecting trampoline netting and pad for wear and damage.

Parts Identification: Trampoline and Enclosure

Trampoline and Enclosure Component List

List of parts for the trampoline and its enclosure, with quantities.

Hardware Components List

Hardware Parts for Assembly

List of all hardware components required for assembly, with quantities.

Assembly and Installation Procedures

General Assembly and Installation Precautions

Key precautions and notices before commencing assembly and installation.

Trampoline Frame Assembly Steps

Step 1: Frame Component Identification

Identification of steel tubing parts for trampoline frame assembly.

Step 2: Leg Support and Top Rail Assembly

Connecting leg supports to top rails with leg sockets.

Step 3: Completing the Top Rail Structure

Inserting top rails to complete the frame structure.

Step 4: Securing Leg Supports to Top Rail

Securing vertical leg extensions to the top rail using screws.

Trampoline Mat Spring Assembly

Step 5: Initial Spring Installation

Hooking springs to mat and frame, ensuring proper tension distribution.

Step 6: Continuing Spring Attachment

Attaching additional springs in an alternating manner.

Step 7: Further Spring Placement

Placing more springs on opposite sides for even tension.

Step 8: Final Spring Installation and Tightening

Attaching remaining springs and tightening frame screws.

Frame Pad Installation

Step 9: Positioning the Frame Pad

Laying the frame pad over the trampoline to cover springs and frame.

Trampoline Enclosure Assembly Steps

Step 10: Assembling Enclosure Poles

Attaching end caps and securing enclosure poles to leg extensions.

Step 11: Connecting Upper to Lower Frame Tubes

Connecting upper enclosure frame tubes to lower frame tubes.

Step 12: Securing Enclosure Frame to Lower Tubes

Connecting upper enclosure frame tubes to lower frame tubes with screws.

Step 13: Tying Enclosure Netting to Mat

Securing the trampoline netting to the mat using provided cords.

Step 14: Securing Frame Pad Straps

Wrapping and tying inner elastic straps of the frame pad.

Step 15: Closing Enclosure and Attaching Placard

Closing enclosure zipper and attaching safety instruction placard.

Disassembly and Moving Procedures

Disassembly and Storage Instructions

Instructions for disassembling and storing the trampoline.

Safe Trampoline Moving Guidelines

Safe procedures for moving the trampoline, requiring multiple people.

Care and Maintenance Guidelines

Routine Inspection and General Maintenance

Guidelines for inspecting and maintaining the trampoline for safety.

Storage and Weather Protection

Instructions for storing the trampoline during harsh weather conditions.

Proper Use and Safety Instructions

User Responsibilities and Supervision Requirements

Defining user responsibilities and the supervisor's role in ensuring safe use.

Safe Jumping Practices and Rules

Rules and practices for safe bouncing, including supervision and environmental conditions.

Learning Trampoline Skills and Bounces

Fundamental Trampoline Skill Lessons

Structured lessons for learning basic trampoline skills and techniques.

Basic Trampoline Bounce Techniques Explained

Diagrams and instructions for fundamental trampoline bounces.

Product Warranty Information

Warranty Coverage and Registration Details

Details on product warranty coverage, duration, and registration.

Warranty Exclusions and Limitations

Information on what the warranty does not cover and legal limitations.

SPORTSPOWER BouncePro TR-0123BGA-168 Specifications

General IconGeneral
TypeTrampoline
ShapeRound
Weight Limit220 lbs
Frame MaterialSteel
Jumping Surface MaterialPolypropylene
Safety EnclosureYes
Number of Springs72
Recommended Age6 years and up
ColorBlue
Size12 feet

Related product manuals