Spring Well CSS1 - Softener Head Bypass Valve Installation; Securing Bypass Fittings and Valves

48) Insert the rubberized
connections into the electronic
head openings and press it in
place.
49) Fully tighten the fasteners on both
valve connections securing the bypass
valves.
47) Install the blue bypass valves
onto the connections on the
electronic head.
50) Attach and tighten a MNPT
Fitting onto the connections on
each of the bypass valves.
51) Apply plumbers' tape to
both MNPT Fittings.
Questions? Call (800)-589-5592 12
Whole House Filter and Water Softener
Installing the Softener Electronic Head