To Next PageTo Next Page
Need help?Do you have a question about the Spring Well CSS1 and is the answer not in the manual?
General| Brand | Spring Well |
|---|---|
| Model | CSS1 |
| Category | Water Dispenser |
| Language | English |
Guide for installing the whole house filter and salt-based water softener.
List of all parts included in the whole house filter and water softener system.
Items recommended for a successful installation of the water system.
Diagram showing the order of tanks and water flow from source to home.
Read instructions fully and do not install on well water without consulting service.
Ensuring tanks stand vertically and fit snugly into the tank boot for stability.
Technical details for SS1, SS4, CF1, and CF4 models, including dimensions, flow rates, and pressure.
Step-by-step guide to securely installing the head onto the carbon filter tank.
Procedure for soaking carbon media in water for 48 hours prior to installation.
Understanding bypass on/off states for water flow through the tank.
Instructions for flushing the carbon media in both tanks before final installation.
Steps to prepare the pre-filter housing and insert the sediment filter with O-ring.
Securing the pre-filter to the wall and preparing for water line connections.
Connecting the pre-filter to the main water supply and the rest of the system.
Guide for installing the electronic head onto the softener tank.
Steps to install and tighten bypass valves and MNPT fittings onto the electronic head.
Positioning and connecting the carbon filter and softener tanks using corrugated pipes.
Connecting the tanks to the water main and the home's water supply.
Connecting the drain line and power supply to the softener electronic head.
Securing the drain line with zip ties and ensuring it's not pinched for proper function.
Connecting the brine tank's drain line and preparing the regen line connection.
Filling the brine tank with salt and replacing lids to prepare for system testing.
Steps to test the system for leaks and proper water flow after installation.
Installing the 'Legacy View' app and connecting to the softener for initial settings.
Setting regeneration day override, reserve capacity, and resin grains for SS1 systems.
Setting brine refill cycle and initiating system regeneration for SS4 systems.
Instructions to address leaks from the tank head collar by re-tightening or reseating the O-ring.
