Spring Well SS4 - User Manual

1
SALT-BASED WATER SOFTENER
MODELS: SS1, SS4, SS+
Installation Instructions
CUSTOMER SERVICE IS AVAILABLE MON-FRI 9AM-6PM EST
800-589-5592
WWW.SPRINGWELLWATER.COM
Our traditional salt-based whole house water softeners
are the most reliable ion exchange softeners on the
market today. Use 40% less detergent, extend the life of
your appliances see less spotting on hard surfaces. All
with an industry-leading warranty!

Summary

Installing the Softener Electronic Head

Attaching the Electronic Head Unit

Steps for unscrewing caps, removing internal parts, and attaching the electronic head to the softener tank.

Connecting Bypass Valves and Fittings

Instructions for installing bypass valves, rubberized connections, and MNPT fittings onto the electronic head.

Installing the Softener Tank and Plumbing

Connecting the Softener to Water Supply

Steps for turning off water, preparing plumbing, installing shut-off valve, and connecting PVC nipple.

Completing Tank Connections

Instructions for connecting corrugated pipes to the softener tank's inlet and outlet ports.

Additional Softener Head and Drain Steps

Installing the Drain Valve and Line

Steps for pulling out the drain valve, attaching the drain line with a hose clamp, and reinserting the valve.

Installing the Brine Tank

Connecting the Brine Tank Drain Line

Steps for positioning the brine tank, connecting its drain line to the drainpipe, and trimming excess.

Attaching the Regen Line and Filling

Testing the Water Softener System

Leak Detection and Bypass Testing

Flow Through Softening Tank

Setting Softener Configuration Values

Initial App-Based Setup

Advanced Softener Value Configuration

Adjusting Advanced Settings (SS1)

Finalizing Softener Settings and Regeneration

Adjusting Advanced Settings (SS4)

Initiating System Regeneration

Spring Well SS4 Specifications

General

Stages	4
Hot Water Temperature	Not applicable
Cold Water Temperature	Not applicable
Filter Life	6-12 months
Type	Under Sink Water Filter System