Spring Well SS1 - User Manual

1
SALT-BASED WATER SOFTENER
MODELS: SS1, SS4, SS+
Installation Instructions
CUSTOMER SERVICE IS AVAILABLE MON-FRI 9AM-6PM EST
800-589-5592
WWW.SPRINGWELLWATER.COM
Our traditional salt-based whole house water softeners
are the most reliable ion exchange softeners on the
market today. Use 40% less detergent, extend the life of
your appliances see less spotting on hard surfaces. All
with an industry-leading warranty!

Summary

Installing the Softener Electronic Head

Attaching the Electronic Head to the Tank

Connecting Bypass Valves and Fittings

Connecting the Softener to Plumbing

Plumbing Connections for Water Inlet;Outlet

Steps for integrating shut-off valves and connecting the softener to water supply.

Connecting Corrugated Water Lines

Additional Softener Head and Drain Steps

Drain Line Assembly and Connections

Securing Drain Line and Powering the Unit

Installing the Brine Tank

Connecting Brine Tank Lines and Drain

System Testing and Initial Run

Leak Inspection and Final Checks

Setting Softener Operational Values

Mobile App Setup and Basic Parameter Configuration

Connecting to the app and setting time, hardness, and regeneration settings.

Advanced Settings and Regeneration

Configuring Advanced Settings for SS1

Adjusting SS1 parameters like capacity, reserve, and regeneration time.

Configuring Advanced Settings for SS4

Adjusting SS4 parameters like capacity, reserve, and regeneration time.

System Regeneration Process

Initiating and Completing System Regeneration

Steps to start and complete the system regeneration cycle.

Spring Well SS1 Specifications

General

Brand	Spring Well
Model	SS1
Category	Water Dispenser
Language	English