Spring Well SS1 - Product Specs

Product Specs
Questions? Call (800)-589-5592 3
Leaning Tank
Tank Boot
Level Tanks
If the tank is not perfectly straight, carefully lift the tank straight up a few inches and tap it on the ground until
the tank stands vertically and fits snuggly into the tank boot.
PLEASE READ INSTRUCTIONS FULLY PRIOR TO ATTEMPTING INSTALLATION. Be sure to follow
all applicable plumbing codes. The system must be installed on a main water supply line
Caution: Do not install on well water unless you have spoken to a customer service
representative first.
SS1
Tank Width 9”
Tank Height 48” (57” with Head)
Flow Rate 11 GPM Service
Connection Size 3/4”
Backwash Rate 2 GPM
Operating Pressure 25-80 PSI
Operating
Temperatures
36 – 120 F
pH Range 6.5 - 10
Grain 32k
Brine Tank 18”(w) x 33”(h)
SS4
Tank Width 10”
Tank Height 54” (63” with Head)
Flow Rate 13 GPM Service
Connection Size 3/4”
Backwash Rate 2.4 GPM
Operating Pressure 25-80 PSI
Operating
Temperatures
36 – 120 F
pH Range 6.5 – 10
Grain 48k
Brine Tank 18”(w) x 33”(h)
Salt-Based Water Softener