45) The regen line will be
inserted to the connection just
inside the brine well. Push the
line all the way in. Once
inserted it will be secure.
46) Replace the lid to the brine
well.
44) Insert the regen line into the
brine tank through the opening
above the drain line you
installed earlier.
47) The brine tank will need to
be filled with 4 to 5 bags of salt
pellets.
49) The system can now be
tested.
Questions? Call (800)-589-5592 11
Fill
48) The lid to the brine tank cab
be replaced.
Installing the Brine Tank
Salt-Based Water Softener
To Next Page
Loading...
