Water Leak from Tank Head
Turn the shut off valve to the
off position.
Disconnect the carbon filter tank from
the system
Water leaking from the tank
head collar indicates the head is
either not tight enough, or that
the O-ring became bunched.
Slowly unthread the head from
the tank approx. half a rotation.
You only need to expose a
small gap between the tank
collar and the tank head.
Reconnect the tank to the system
and proceed back to page 19 to
test the system again.
Questions? Call (800)-589-5592 23
Fully re-tighten the head onto
the tank. The O-ring will now
be able to reseat.
Whole House Filter and Water Softener
To Previous Page
Loading...
