Prepping the Pre-Filter
This step will require the materials listed below
Pre-Filter Housing Sediment Filter O-Ring w/Lube
21) Unscrew the lid from the
pre-filter Housing.
25) Insert the Sediment Filter
into the pre-filter Housing.
22) The O-ring will now be laid
into the groove around the top
of the pre-filter Housing tank.
23) Squeeze lubricant onto the
O-ring then spread it using your
finger.
24) Flip the O-Ring over and
lubricate the opposite side as
well.
26) Replace the lid and fully
tighten it
Questions? Call (800)-589-5592 8
Whole House Filter and Water Softener
To Next Page
Loading...
