Springfield PreciseTemp 91756 User Manual

WIRELESS MULTI-ZONE
THERMOMETER and HYGROMETER
with CLOCK
Model No. 91756
User’s Manual
BASE STATION REMOTE SENSOR
FEATURES AND SPECIFICATIONS
BASE STATION
• Indoor / wireless outdoor temperature, °C / °F selectable
• Indoor / wireless outdoor humidity
• Memory function to recall min / max temperature and humidity readings
• Temperature trend indicators
• Can accept up to 3 remote temperature and humidity sensors
• Remote channel auto-scroll
• Programmable high / low temperature alert
• Heat Index readings
• 12 / 24 hour clock with alarm
• Calendar
• Countdown timer – 23 hours, 59 minutes, 59 seconds
• Low battery indicators for base station and remote
• Indoor temperature range: 14°F to 158°F (-10°C to 70°C)
• Indoor humidity range: 20% to 95%
• Tabletop easel stand or wall mount
• Uses (2) AAA batteries (not included)
Page 1

Springfield PreciseTemp 91756 Specifications

General

Brand	Springfield
Model	PreciseTemp 91756
Category	Thermometer
Language	English

Summary

Features and Specifications

Battery Installation and Setup

Base Station Battery Installation

Install batteries in the base station according to polarity markings.

Register the Remote Sensor

Install batteries in the remote sensor within the time the RF signal icon is flashing on the base station.

Locating the Base Station and Remote Sensor

Operating Instructions

Mode Button Operation

Scroll through Alarm time, Timer, and back to normal time display using the MODE button.

Setting the Clock and Calendar

Set the hour, minutes, month, day, and year for the clock and calendar.

Alarm Clock with Snooze

Setting the Alarm Time

Set two different alarm times, Alarm 1 and Alarm 2, including hour and minutes.

De-activating the Alarm

Turn off a previously set alarm by pressing SET/AL until the alarm bell icon is no longer shown.

Activating the Alarm

Turn on a previously set alarm by pressing SET/AL until the alarm bell icon and channel (1 or 2) are shown.

Silencing the Alarm

Press any button to silence the alarm or SNOOZE for a 5-minute snooze function.

Max / Min Memory

Temperature Alerts

Setting the Indoor Temperature Alert

Set high and low temperature alert levels for the indoor temperature readings.

Setting the Outdoor Temperature Alert

Set high and low temperature alerts for a selected remote sensor channel (1, 2, or 3).

Activating and De-Activating Temperature Alerts

Toggle the temperature alert function on or off using the ALERT button.

Heat Index

Countdown Timer

Purchasing Additional Remote Sensors

FCC Statement of Compliance

Limited Warranty