SprintRay ProCure2 - User Manual

Touchscreen
Curing Drawer
Power Port
Power Switch
Level
Surface
USB Cable
With USB type C adapter
Power Cable
Curing Tray
Refer to section 5
ProCure 2 Onboarding Card
High-Speed Post Curing System Designed for Digital Dentistry
Quick Start Guide
Congratulations!
In this brief guide, you’ll learn how to set up and use your
ProCure 2 post-curing system.
Please follow the instructions carefully and visit our
webiste for tips & tricks.
We’re so excited to see what you make!
Training and Support
Contact our team of support technicians
with questions.
In the Box
Situate ProCure 2 in a well-ventilated
area on a flat, level surface. Keep it away
from extreme temperatures, windows,
and direct sunlight.
Hot air exhausts through ventilation
located on the back and bottom of
ProCure 2. Do not obstruct.
Where to Set Up
Plug in ProCure 2
Use the provided power cable to plug ProCure 2
into a surge protector or uninterrupted power
supply. Turn it on by flipping the power switch
located on the back of the unit.
To perform a reset, use the power switch or
disconnect ProCure 2 from its power source.
Recommended
Operating Temperature
Min 21 °C
70 °F
Max 29 °C
85 °F
Uneven Surface
Warm Environment
1
2
3

Summary

SprintRay ProCure 2 Quick Start Guide

Training and Support

Contact support technicians for assistance with SprintRay ProCure 2.

In the Box Contents

Setting Up the ProCure 2

Location and Environment

Situate in a well-ventilated, level area away from extreme temperatures and direct sunlight.

Powering the Unit

Plug into a surge protector and turn on using the rear power switch.

Wireless Network Connection

Installing the Curing Tray

Tray Placement and Drawer Closure

Open UV drawer, place tray inside frame, and close drawer slowly.

Operating the ProCure 2

Curing Process and Material Selection

Place models on tray, close drawer, and select material on touchscreen.

Zone Selection for Curing

Choose specific zones (A or A+B) to optimize curing time for fewer models.

Maintenance and Troubleshooting

Software Updates

ProCure 2 receives automatic over-the-air updates when connected to a network.

Troubleshooting Assistance

Contact customer support for advanced troubleshooting; use USB for manual updates.

SprintRay ProCure2 Specifications

General

Brand	SprintRay
Model	ProCure2
Category	3D Printers
Language	English