1) Place the appliance on a flat ground in a dry and indoor place,
away from direct sunshine, at least 20cm away from the wall,
and far away from anything flammable.
2) Use three-hold socket and electrical leakage protection switch.
3) The power cords should be connected to suitable electrical
socket. The power cords shall be exchanged by sellers or
professionals appointed, when destroyed.
4) For avoiding dry heating under no water, and destroy heating
elements, please open hot water tap until water flow out, then
connect power cord to electrical socket and turn on the power
switch.
5) If hot water has not been used for a long time, please turn off
the power switch for power saving.
6) If the dispenser has not been used for a long time, kindly turn
off the power switch, unplug the power cord and drain all the
residual water.
7) Please follow cleaning instructions outlined in this manual, to
regularly clean the dispenser.
8) At any time, the dispenser must not be immersed in water.
To Next Page
Loading...