Quick Start Guide
Power on
Take the earbuds out of the charging case and the
earbuds will be automatically power on. Alternatively
in the power-off state, touch the left or right earbud
for 2 seconds.
Power off
Put the earbuds into the charging case and the
earbuds will automatically power off. To manually
power off, disconnect from your device’s Bluetooth
and touch the left or right earbud for 8 seconds.
Pairing
After taking the earbuds out of the charging case,
the left and right earbuds will be automatically power
on and connect to each other. Turn on Bluetooth on
your mobile phone/music device*. Open your list of
Bluetooth devices, select “CADENCE TWS” and pair.
Single ear use will also be supported.
* If you are not familiar with Bluetooth pairing for
your mobile phone or music device, refer to the
user guide for your mobile phone/music device for
instructions to pair a new device using Bluetooth.
To Next Page
Loading...
