SPT IM-100 - User Manual

Questions and Answers

T
torresbethJul 31, 2025
What to do if the SPT Ice Maker is making ice cubes that stick together?
- K
  Kim MillerJul 31, 2025
  If your SPT Ice Maker is producing ice cubes that stick together, it could be due to a couple of reasons. First, the ice-making cycle might be too long. To resolve this, stop the ice maker, wait for the ice blocks to melt, and then restart it, selecting the small ice size. Another reason might be that the water temperature in the inner tank is too low. In this case, change the water in the reservoir, ensuring you use water between 45°F and 90°F.
M
michaelsmithAug 6, 2025
Why is the 'Water' indicator on my SPT IM-100 Ice Maker lit?
- J
  Julie OwensAug 7, 2025
  The 'Water' indicator on your SPT Ice Maker is on because the water level is low. To fix this, stop the ice maker, fill it with water, and then restart it.
C
Cynthia WalkerAug 12, 2025
What to do if my SPT Ice Maker is not making ice even though the cycle is normal?
- J
  Joanne ProctorAug 12, 2025
  If your SPT Ice Maker's cycle is normal, but no ice is being made, it could be caused by a high ambient temperature or the water temperature in the inner tank being too high. Ensure that you operate the ice maker below an ambient temperature of 90°F and use cold water. If this doesn't resolve the issue, there may be a refrigerant liquid leakage or a blockage in the cooling system pipe. In either of these cases, consult a qualified technician.
C
Craig JimenezAug 18, 2025
What does it mean when the 'Water' and 'Ice' indicators are both flashing on my SPT IM-100?
- F
  frostmatthewAug 19, 2025
  If both the 'Water' and 'Ice' indicators are flashing on your SPT Ice Maker, it indicates that the ice shovel is stuck. Check to see if any ice is blocking the ice shovel. If there's no ice blockage, you should consult a certified technician.
J
John WallaceAug 25, 2025
How to fix the 'Ice' indicator on my SPT IM-100?
- A
  april40Aug 25, 2025
  The 'Ice' indicator on your SPT Ice Maker is on because the ice basket is full. To resolve this, remove the ice from the ice basket.

Summary

Important Safety Instructions

Preparing Your Ice Maker for Use

Important Safety Tips

Basic safety precautions for reducing fire, electric shock, and injury risks when using appliances.

Getting to Know Your Unit

Unit Components Overview

Details of the ice maker's parts including cover, control panel, and accessories.

Control Panel Functions

Details on the control panel's buttons for starting/stopping and selecting ice cube size.

Operating Procedures & Maintenance

Unpacking Your Ice Maker

Steps for removing packaging, cleaning, and initial setup of the ice maker.

Connecting Your Ice Maker

Instructions for safely connecting the ice maker to a power outlet.

Cleaning and Maintaining Your Ice Maker

Procedure for cleaning the interior, exterior, and drain cap of the ice maker.

Using Your Ice Maker

Troubleshooting

Indicator Light Problems

Addresses issues with 'Water', 'Ice', or both indicators flashing.

Ice Formation Issues

Resolves problems like ice sticking together or slow/no ice production.

Technical Parameters

Specifications

Details on model, power, consumption, refrigerant, weight, and size.

Defective Notice

Instructions for handling defective or malfunctioning products, including contact information.

Your Guarantee

SPT IM-100 Specifications

General

Type	Portable Ice Maker
Ice Production Capacity	26 lbs per day
Ice Storage Capacity	1.5 lbs
Water Reservoir Capacity	2.2 Liters
Voltage	115V
Ice Shape	Bullet
Control Type	Electronic
Frequency	60Hz
Ice Size Options	Small, Large
Power Consumption	120W