ISSUE POSSIBLE CAUSE WHAT TO DO
Dishes were not properly loaded Reload dishes properly°
Selected wash cycle was not
Select a more intensive wash cycle°
powerful enough
Dishes are not
cleaned Not enough detergent Use more or change brand of detergent°
Items are blocking the path of the Rearrange items so the spray arm can
spray arm fully rotate°
The filters are dirty/clogged or Clean the filter and/or check installation.
installed incorrectly
Combination of too much detergent Use less detergent and/or select the
Cloudiness on with soft water shortest wash cycle to clean glassware°
glassware
The filters may be dirty or clogged Clean filters and/or check installation.
Black or gray marks Utensils may have rubbed against Use a mild abrasive cleaner to eliminate
on dishes dishes marks° Load more carefully°
Detergent left in
Dishes blocked the detergent cup Re-load dishes properly°
dispenser cup
Improper loading Re-load dishes properly°
Not enough rinse-aid Refill the rinse aid.
Dishes are not dry Dishes were removed too soon Do not remove dishes from the
dishwasher immediately after wash°
Short cycles have lower cleaning
Wrong cycle selected performance° Choose a more intensive
cycle°
Dishes/cutlery have low-quality Water drainage is more difficult with
coating these items. Dishes/cutlery of this type
are not suitable in this dishwasher°
INDICATION
The Soak program indicator
light flickers rapidly
The Glass program Indicator
flickers rapidly
MEANINGS
Restricted water inlet
Overflow
POSSIBLE CAUSES
Water supply is not turned on or
restricted; or water pressure too low
Some element of dishwasher leaks°
If overflow occurs, turn off the main water supply before calling for service.
If there is water in the base pan due to an overfill or small leak, the water should be removed
before restarting the dishwasher.
17
To Next Page
Loading...
