To Next PageTo Next PageWhat to do if my SPT SD-71E Dehumidifier unit fails to start?
If your SPT Dehumidifier fails to start, check the following: * Ensure the power cord is securely plugged in and the power is on. Also, check the outlet, fuse, or circuit breaker. * Make sure the water bucket is correctly placed. * Empty the water bucket if it is full, or if the set humidity level has been reached.
Why is the performance of my SPT SD-71E decreased?
If you notice decreased performance in your SPT Dehumidifier, consider the following: * Clean the air filter, as a blocked filter can hinder performance. * Close all windows and doors to prevent moisture from entering the room. * Remove any obstacles blocking the air outlet or inlet. * Allow the unit more time to remove moisture from the air. * Adjust the humidity setting if it is set too high. * Increase the ambient temperature if it is below 41°F.
What to do if there is water on the floor near my SPT SD-71E Dehumidifier?
If you find water on the floor near your SPT Dehumidifier: * Tighten the hose connection if you are using continuous drainage. * If you're using the bucket, ensure the drain plug is securely replaced.
How to fix a noisy SPT SD-71E Dehumidifier?
If your SPT Dehumidifier is making unusual noises: * Make sure the unit is placed on a stable and level surface. * Clean the filter, as a blocked filter can cause noise.
Why does frost appear on the coils of my SPT SD-71E?
If you notice frost appearing on the coils of your SPT Dehumidifier, note that this is normal. The dehumidifier has an auto-defrost feature, so continue using it normally.
Why is my SPT SD-71E not collecting as much water in winter?
If your SPT Dehumidifier isn't collecting as much water during the winter months, it's because the absolute humidity level drops when the temperature is low. This is a normal occurrence.
How to insert the continuous drain tube into my SPT Dehumidifier?
To ease the insertion of the continuous drain tube into your SPT Dehumidifier, soak the plastic white connector in hot water for a few minutes. This will soften the plastic and make the connection easier.
General| Brand | SPT |
|---|---|
| Model | SD-71E |
| Category | Dehumidifier |
| Language | English |
Explains the function of each control button on the unit, including power, fan speed, and timer.
Details the display panel functions, including humidity levels and error/protection codes like AS, ES, P2, EC.
Lists and identifies the front components of the dehumidifier, such as the control panel and air grilles.
Lists and identifies the rear components of the dehumidifier, including the drain outlet and power cord.
Lists the accessories provided with the dehumidifier, such as a drain hose and adapter.
Provides guidelines on where and how to position the dehumidifier for optimal use and airflow.
Details on removing the water bucket and setting up continuous drainage.
Instructions for cleaning the grille, housing, water bucket, and air filter.
Steps for properly storing the dehumidifier when not in use.
Lists technical data for different models, including moisture removal, power, and dimensions.
Provides solutions for common problems like unit failure, noise, or frost.
