SAFETY PRACTICES
TRANSPORTING SAFETY PRACTICES
• Make sure the wheels are locked into place.
• Towing speed should not exceed 20 MPH due to farm rated tires and wheels.
• The slow moving vehicle sign along with any other lights and reflectors required by
the local highway and transport authorities must be in place.
• Lights must be clean and visible by overtaking and oncoming traffic.
• Keep the towing vehicle and the Conveyor under control when going down long
and/or steep grades.
• Do not allow riders on Conveyor during transportation.
OPERATING SAFETY PRACTICES
• Do not allow riders on Conveyor during field operation.
• Emptied Conveyor system of Product before moving entire line. This will lessen the
chance of damaging the Conveyor and makes the move easier.
• Be careful when operating Conveyor on uneven terrain, hillsides, or near ditches to
avoid the potential of overturning the Conveyor.
• Keep safety decals and signs clean and legible at all times.
• Replace safety decals and signs that are missing or have become illegible.
• When replacing a part that displays a safety sign, make sure that the new parts also
display the safety sign.
• Safety decals or signs are available from your dealer parts department.
4/25/2002
8
To Next Page
Loading...