WARRANTY POLICY
1- Warranty on all normal maintenance items such as; rollers, sprockets, roller
chain, belt lacing, and bearings etc. will be for one season (Not to exceed vendor
warranty). A season being 720 Hr. not to exceed 183 days. All other materials and
workmanship will be warranted for one full year from date of purchase. (Some
components carry more than a one-year warranty from the vendor, this will be
passed on to the customer where applicable).
2- No warranty payment will be made for failure of the customer to operate and
maintain the machine according to proper procedures, written or customary.
Machines must be used within reasonable limits.
3- All warranty must be completed within one year of purchase unless an
agreement is made with Spudnik Equipment Company LLC to do otherwise, prior to
the end of the year.
4- No warranty payments will be made without a REQUEST FOR WARRANTY
PAYMENT signed by the customer, and all faulty parts are returned to Spudnik
Equipment Company LLC.
5- All paint will be warranted for one year only. Paint warranty must be done within the
first twelve months of purchase. Rock chips and other abuse to the painted surface
will not be considered for warranty payment. When warranting workmanship or paint
on equipment Spudnik reserves the right to determine whether whole or part of the
machine will be warranted. Items paint will be warranted for;
a- Insufficient coverage.
b- Failure of the paint , due to the use of incorrect product or incorrect application
of product.
c- Excessive runs and imperfections. Runs will not be sufficient to constitute
warranty unless they affect more than 15% of the paint on the machine.
6- No warranty on motors or electrical components, unless;
a- Approved by vendor (our source of supply).
b- Spudnik installed incorrect components.
c- Spudnik incorrectly installed components.
7- All exceptions to this policy must be approved by Spudnik Equipment Company LLC.
4/25/2002
4
To Next Page
Loading...