Spudnik 1205 - Page 15

4/25/2002
13
SSSC-0
CONVEYOR OPTIONS
1. STANDARD LENGTHS OF CONVEYOR ARE: 20’, 24’, 30’& 40’.
2. CONVEYOR BELT;
• 24” WIDE CONVEYOR
• #261005 - BELT,FLAT,24” 1/32”X 1/32” 150#
• 20’ LONG, 39’10” BELT LENGTH LACE BOTH ENDS
• 24’ LONG, 47’10” BELT LENGTH LACE BOTH ENDS
• 30’ LONG, 59’10” BELT LENGTH LACE BOTH ENDS
• 40’ LONG, 79’10” BELT LENGTH LACE BOTH ENDS
• #261466 - LACING,#5-3 CLIPPER (12FT PER BOX)
(4FEET)
• #261479 - ROD,LACE,3/23” X 36”
(QTY - 1PER BELT)
• 30” WIDE CONVEYOR
• 20’LONG, #261006 - BELT,FLAT,30” 1/32”X 1/32” 150#
39’10” BELT LENGTH LACE BOTH ENDS
• #261466 - LACING,#5-3 CLIPPER (12FT PER BOX)
(5FEET)
• 24’LONG, #261537 - BELT,ASSY,1200/1205,30” X 47’10”FLAT
• 30’LONG, #261538 - BELT,ASSY,1200/1205,30” X 59’10”FLAT
• 40’LONG, #261539 - BELT,ASSY,1200/1205,30” X 79’10”FLAT
• #261479 - ROD,LACE,3/23” X 36”
(QTY - 1PER BELT)
• 36” WIDE CONVEYOR
• 20’LONG, #261007 - BELT,FLAT,36” 1/32” X 1/32” 150#
39’10” BELT LENGTH LACE BOTH ENDS
• #261466 - LACING,#5-3 CLIPPER (12FT PER BOX)
(6FEET)
• 24’LONG,#261540 - BELT,ASSY,1200/1205,30” X 47’10”FLAT
• 30’LONG,#261541 - BELT,ASSY,1200/1205,30” X 59’10”FLAT
• 40’LONG,#261542 - BELT,ASSY,1200/1205,30” X 79’10”FLAT
• # 261502 - ROD,LACE,3/32” DIAMETER 303 SS
(QTY - 1PER BELT)
(38” LONG)
These Belt lengths are for standard length conveyors.
For custom length conveyor the Formula is: Conveyor Length (times) x 2, (minus) -2” = Belt
Length.
2. MOTOR;
• 24’ OR SHORTER 24” OR 30”WIDE CONVEYOR
• # 651054 - MTR,C-FSCE,1PHASE 2HP P145TC 7/8” K107
• # 651024 - MTR,C-FACE,3PHASE 2HP 145TC 7/8”
• 25’ OR LONGER 24” OR 30”WIDE CONVEYOR & ALL 36” WIDE CONVEYOR
• # 651053 - MTR,C-FACE,1PHASE 3HP 184TY/145TC 7/8”362281
• # 651055 - MTR,C-FACE,3PHASE 3HP 182TCZ(145TC) 7/8”
Revised: Change Lacing from #261476 - LACING,#4-2 CLIPPER RECT HOOK 12 FT/BOX
To #261466 - LACING,#5-3 CLIPPER (12FT PER BOX) ECN #928 01/03/01