Need help?Do you have a question about the SPX FLOW Hankison HPR25 and is the answer not in the manual?
General| Model | HPR25 |
|---|---|
| Category | Dehumidifier |
| Manufacturer | SPX FLOW Hankison |
| Type | Refrigerated |
| Air Flow Rate | 25 SCFM |
| Inlet Temperature | 100°F (38°C) Max |
| Weight | 45 lbs (20.4 kg) |
| Power Supply | 115V/1Ph/60Hz |
Specifies indoor dryer placement and ambient temperature limits for optimal operation and to prevent freeze-up.
Details dryer mounting, ventilation requirements, and proximity clearances for service access and airflow.
Covers system arrangement, piping, condensate removal, and electrical connections for proper installation.
Explains the ON/OFF switch, its indicator light, and the color indicator for dryer status and troubleshooting.
Details the electronic drain valve, its controls, and settings for optimal condensate discharge.
Guides through the dryer start-up process and essential operating points to verify correct function.
Outlines the safe procedure for shutting down the dryer for maintenance or other purposes.
Details daily and monthly maintenance tasks, including checking separators and cleaning condenser coils.
Provides instructions for disassembling, cleaning, and servicing the electronic drain valve.
Identifies common dryer problems like water downstream and pressure drop, with possible causes and remedies.
Lists technical specifications including capacity, dimensions, power, and refrigerant type for HPR models.
Defines the minimum and maximum operating parameters for inlet air pressure, temperature, and ambient temperature.
Provides a table of common replacement parts and their corresponding part numbers for HPR25, HPR35, and HPR50 models.
Outlines the manufacturer's warranty coverage, exclusions, and procedures for service or repair.
To Next Page