Need help?Do you have a question about the SPX 2065LV and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Power Source | Electric |
| Housing Material | Cast Iron |
| Inlet/Outlet Size | 1.5" NPT |
| Seal Type | Mechanical Seal |
Lists applicable industry standards and explains hazard symbols.
Details operational limits like capacity, viscosity, pressure, and temperature.
Recommendations for installing supply/discharge piping and valves.
Identifies common installation issues that lead to operational problems.
Instructions for electrical hookup, wiring, and verifying motor rotation.
Outlines steps for cleaning the pump and piping before initial operation.
Guides on test runs and checking motor amp draw for overload.
Step-by-step guide for starting and priming the pump.
Step-by-step guide for disassembling a pump with a Type 1 seal.
Instructions for assembling Type 1 seal components.
Covers disassembly and assembly of Type 4 double seals.
Covers disassembly and assembly of cartridge seals.
Identifies causes and solutions for low liquid delivery and pressure.
Addresses motor overload causes, vibration, and noise troubleshooting.
Discusses causes and remedies for rapid seal wear and leaks.
To Next Page