HYDRAULIC PUMP
Max. Capacity: See Pump Data Plate
Definition: A hydraulic pump delivers hydraulic fluid under
pressure through the use of compressed air, an electric motor,
or a gas engine as a power source.
Form No. 102875
Operating Instructions for:
Electric Motor Powered Pumps
Gas Engine Powered Pumps
Rotary Air Motor Powered Pumps
(As listed in EC Declaration)
dB(A) at
Idle and
Pump kw 700 Bar
PE8 Series .37 67/81
PE17 Series .37 67/81
PA17 Series 1.12 85/90
PE30 Series .74 87/82
PG30 Series 1.49 84/96
PE46 Series 1.12 77/81
PA46 Series 2.24 85/90
PE55 Series .84 87/86
PA55 Series 2.24 87/88
PG55 Series 2.98 75/87
PR10 Series .19 65/72
PG18 Series 1.86 81/96
PG120 Series 4.1 85/95
PQ120 Series 2.24 73/78
PG400 Series 14.9 N/A
66262 2.24 N/A
UNIVERSAL
MOTOR
TEFC MOTOR
AIR MOTOR
DC MOTOR
RESERVOIR
GASOLINE
ENGINE
NOTE:
• For a detailed parts list or to locate a Power Team Authorized
Hydraulic Service Center, contact your nearest Power Team facility.
A list of all Power Team facilities is located at the end of this
document.
•
Carefully inspect the pump upon arrival. The carrier, not the
manufacturer, is responsible for any damage resulting from
shipment.
• The customer can choose from a variety of motors, controls,
reservoirs, and other options. These instructions will include
directions for options that your particular pump may not have.
• Do not change motors without consulting the pump manufacturer's
Technical Services Department.
To Next Page
Need help?
General
