To Next PageTo Next Page
Need help?Do you have a question about the SPX Power Team PE55-E110 Series and is the answer not in the manual?
General| Brand | SPX |
|---|---|
| Model | Power Team PE55-E110 Series |
| Category | Water Pump |
| Language | English |
Step-by-step guide on how to fill the hydraulic pump reservoir with fluid.
Instructions for correctly making hydraulic hose and tubing connections.
Procedure for removing trapped air from the hydraulic system.
Initial steps and checks for operating the pump for the first time.
Specific instructions for operating the electric pump unit.
Operation of a 2-position, 2-way manual valve with single-acting cylinders.
Operation of a 3-position, 3-way manual valve with single-acting cylinders.
Operation of a 3-position, 4-way manual valve with double-acting cylinders.
Explanation and installation of "Posi-Check" valves for pressure retention.
Operation and safety warnings for the automatic dump valve.
Operation of a solenoid valve for single-acting cylinders.
Operation of a solenoid valve for double-acting cylinders.
Steps to adjust the pressure regulating valve for desired pressure settings.
Procedure for setting the pressure switch to control pump operation.
Instructions for checking fluid levels and refilling the reservoir.
Guidelines for cleaning the hydraulic pump components.
Installation instructions for the optional reservoir vent air filter.
Steps for draining and cleaning the hydraulic fluid reservoir.
