Need help?Do you have a question about the SPX W+ and is the answer not in the manual?
General| Voltage | 115 V |
|---|---|
| Housing material | Thermoplastic |
| Frequency | 60 Hz |
| Maximum flow rate | 25 GPM |
| Max Flow Rate | 25 GPM |
Provides crucial safety guidelines and general precautions for operating and maintaining the pump.
Details the risks of electric shock from the motor and mandates qualified personnel for electrical work.
Warns of severe injury from moving parts during disassembly and stresses the need for power lockout.
Covers the dangers associated with high-temperature liquids or cleaning solutions and necessary precautions.
Addresses risks from pressurized fluids, potential leaks, and explosion hazards, with preventative measures.
Highlights dangers from fluid leaks and spills, including slippery floors and contact with hazardous substances.
Explains cavitation, its causes like low inlet pressure, and methods to prevent pump damage.
Outlines electrical installation requirements, including compliance with codes and safe disconnect procedures.
Provides comprehensive instructions for dismantling the pump and replacing the shaft seal components.
Offers step-by-step guidance for removing and installing a new motor, including bearing considerations.
To Next Page
