453342 ISS 07.2010
Contents:
USA
Section Page Description
- 1 Introduction
- 3 Warnings
- 6 Important Warnings
- 8 Sectional Drawing
1 10 Introduction to the W+
1.1 - W+ range
1.2 - W+ pump features
1.3 - Identifying the pump model
2 11 Installation of the pump
2.1 - Positioning
2.2 - Lining up the pipe system
2.3 - Power supply
2.4 - Water supply for water-flushed shaft seal
2.5 12 Connecting steam or steam condensate for aseptic use
3 12 Before start-up
3.1 - Checking the pump body for foreign material
3.2 - Testing the pump
4 13 Putting the pump into service
4.1 - Flushing water/steam/condensate etc.
5 13 Maintenance
5.1 - Checking the shaft seal
5.2 - Replacing the shaft seal
5.3 15 Replacement of motor
5.4 16 Recommended spare parts
6 17 Technical data
6.1 - Maximum permissible outlet pressure
6.2 Required torques
7 Spare parts list and Pump dimensions
To Next Page
Loading...
