Need help?Do you have a question about the SPX Macerator TA3P10-19 and is the answer not in the manual?
General| Type | Macerator Pump |
|---|---|
| Model | TA3P10-19 |
| Voltage | 230V |
| Power | 1 HP |
| Phase | Single |
| Housing Material | Cast Iron |
| Impeller Material | Stainless Steel |
| Inlet Ports | 1-1/2" NPT |
Details the materials and specifications of the pump's components.
Lists model numbers and part numbers for 12V and 24V variants.
Guidance on mounting, connections, and electrical setup for optimal performance.
Requirements for electrical hookup, including standards, fuses, and wiring.
Provides wire gauge recommendations based on voltage drop and warns against running the pump dry.
Details fluid compatibility, temperature limits, and continuous operation restrictions.
Step-by-step procedures for pump disassembly and assembly.
Guidelines for proper disposal and recycling of the product at its end of life.
Presents performance metrics like flow rate and pressure across different voltage and load conditions.
Illustrates the pump's physical layout, dimensions, and sectional views.
Details all components with part numbers, descriptions, and cross-references in multiple languages.
Diagrams and descriptions for electrical connections, including component identification.
Specifies adherence to ISO standards and placement of electrical components relative to the pump.
Provides contact information for SPX Flow Technology Sweden AB and regional sales representatives.
States copyright details, issue date, and revision number of the manual.
To Next Page