Need help?Do you have a question about the SPX Hankison DHW 25 and is the answer not in the manual?
General| Type | Refrigerated Air Dryer |
|---|---|
| Model | DHW 25 |
| Brand | SPX Hankison |
| Capacity | 25 cfm |
| Air Flow | 25 cfm |
| Maximum Inlet Temperature | 120°F |
| Inlet Temperature | 100°F |
| Voltage | 115V |
| Connection Size | 1/2 inch NPT |
| Dew Point | 38°F |
| Power Supply | 115V/1ph/60Hz |
Instructions for checking shipment for visible or concealed loss or damage upon receipt.
Covers precautions for pressurized devices, electrical, and breathing air.
Explains how dual tower regenerative desiccant dryers work by adsorption and regeneration.
Describes the air flow through the towers and the automatic timing of regeneration cycles.
Details the optional air by-pass assembly and its operation for different models.
Provides physical specifications and connection details for each model.
Details power requirements per model and the electrical connection diagram.
Guides on optimal placement, aftercooler/separator, and prefilter requirements.
Instructions for installing prefilters and afterfilters, and their purpose.
Covers wall-mounting, piping, electrical connections, and muffler installation.
Initial start-up procedures, leak checks, and system pressurization.
Determining air flows and understanding operating parameters.
Regular checks, monitoring indicators, and safe shutdown procedures.
Detailed steps for removing and refilling desiccant towers.
Instructions for replacing filter elements, including safety warnings.
Guidance on auto drain replacement and a list of available repair parts.
Details the manufacturer's warranty period, coverage, and limitations.
Specifies what is not covered and limits the manufacturer's liability.
To Next Page
