Need help?Do you have a question about the SPX Hankison DHW 13 and is the answer not in the manual?
General| Model | DHW 13 |
|---|---|
| Type | Refrigerated Air Dryer |
| Maximum Inlet Temperature | 50°C |
| Refrigerant | R134a |
| Pressure Dew Point | 3°C |
| Operating Pressure | 232 psi (16 bar) |
Instructions for checking shipment for loss or damage upon delivery.
Explains the dual tower regenerative desiccant dryer mechanism.
Details the air flow and tower switching process during operation.
Describes the optional air by-pass assembly for selecting dry or bypass modes.
Provides physical dimensions, connection types, and weights for various models.
Details electrical requirements, including wattage for different models.
Advises on optimal placement of the dryer within the compressed air system.
Instructions for installing prefilters and afterfilters to protect the dryer.
Guidance on securely mounting the dryer enclosure to a wall.
Instructions for connecting the air lines to the dryer.
Details on connecting the dryer to the power supply.
Instructions for installing the exhaust muffler.
Guidance on installing the optional moisture indicator.
Notes on the initial desiccant state and readiness for operation.
Steps for initial pressurization and powering on the dryer unit.
Details air flow rates at various pressures and temperatures for inlet, purge, and outlet.
Specifies maximum/minimum pressures and maximum operating temperature for the dryer.
Lists key points to check periodically for proper dryer functioning and indicator status.
Procedure for safely shutting down the dryer unit.
Steps to safely release pressure from the dryer system.
Procedure for replacing desiccant, including frequency and method.
Guidance on replacing filter elements to maintain filtration efficiency.
List of available replacement parts with model numbers for various dryer components.
To Next Page
