Need help?Do you have a question about the SPX Hankison DHW 50 and is the answer not in the manual?
General| Type | Desiccant Air Dryer |
|---|---|
| Model | DHW 50 |
| Brand | SPX Hankison |
| Capacity | 50 SCFM |
| Flow Rate | 50 SCFM |
| Inlet Temperature | 100°F |
| Operating Pressure | 100 psi |
| Voltage | 115V |
| Power Supply | 1 Phase, 60 Hz |
| Pressure Dew Point | -40°F |
Instructions for checking shipment for visible or concealed loss or damage.
Safety precautions regarding pressurized devices, electrical, and breathing air.
Explains how dual tower regenerative desiccant dryers work.
Describes the air flow and tower switching mechanism.
Details the optional air by-pass assembly for different models.
Provides physical dimensions, connection types, and weight for models.
Lists wattage for models and shows the electrical hook-up diagram.
Guidance on optimal placement, aftercooling, and filtration needs.
Covers filter, wall-mounting, piping, electrical, muffler, and indicator installation.
Steps for safely starting up the desiccant dryer.
Details on air flow rates for inlet, purge, and outlet at various conditions.
Specifies working pressure/temperature and periodic operational checks.
Procedures for safely shutting down and depressurizing the unit.
Procedure, frequency, and quantity needed for desiccant replacement.
Guidance on maintaining and replacing prefilter/afterfilter elements.
Covers auto drain replacement and lists available repair parts.
Details the manufacturer's warranty terms, conditions, and limitations.
To Next Page
