SPXFLOW Delair Etsiline CommPact - User Manual

Quick reference delair® Etsiline CommPact
Starting Air Dryer
1. Connect the air dryer to the power supply
2. Switch S4 to turn ON (I) the air dryer.
3. Display AT1 will illuminate and starts to display process status, running hours, pressure and status
internet connection
4. By opening (switch upwards) valves on the front side of the unit (V1 till V8) the corresponding
connection on back side of the unit will deliver dry air.
Stopping Air Dryer
1. Switch S4 to turn OFF (0) the air dryer.
2. Close the dry-air supply valves (V1…V8)
3. Disconnect dryer from power supply if necessary
Information about connections
All connections are positioned on the back side of the unit.
Figure 1.2; Back view with identification of connections (option with adaptor is shown here)
Figure 1; Front view with identification of controls

Summary

Starting the Air Dryer

Power Connection and Activation

Connect the air dryer to the power supply and switch S4 ON.

Display and Status Information

AT1 display shows process status, running hours, pressure, and internet connection.

Dry Air Output Valves

Open valves V1-V8 to deliver dry air from corresponding back connections.

Stopping the Air Dryer

Deactivation Procedure

Switch S4 OFF and close the dry-air supply valves (V1-V8).

Power Disconnection

Disconnect the dryer from the power supply if necessary.

Unit Connection Overview

Back Panel Connections

All unit connections are positioned on the back side.

Electrical Power and Data Connections

48 Vdc Power Supply

Details for 48Vdc supply connector CON8 and socket CON7.

Main Voltage Power Input

Connector CON5/CON6 for 90-264Vac power with option 0281544.

Ethernet and Alarm Ports

Ethernet via CON4 and alarm connector CON9/CON10 for external alarms.

Dry Air Outlets and Sensing

Hose connections for dry air (1-8) and remote sensing via connection 9.

Ethernet Interface and Logging

Remote Monitoring and Control

Check status and change parameters via Ethernet connection.

Web Browser Login

Default username and password for accessing the unit via web browser.

Troubleshooting and Failure Checks

Common Failure Checks

Check for leakages, dryer settings, power supply, and fuse.

Fuse Holder Identification

Details on fuse holder F1 and its 2A fuse protecting heater elements.

Accessing Detailed Manual

Detailed information is in manual ACMM16WC0002 on the included USB-stick.

SPXFLOW Delair Etsiline CommPact Specifications

General

Category	Control Unit
Input Voltage	24 VDC
Manufacturer	SPXFLOW
Model	Etsiline CommPact
Communication Protocols	Modbus