SPYKER 288 SUPER - Spreader Assembly Instructions; Spreader Assembly (Steps 1-4)

1. Unpack spreader,
and place on a flat
surface.
2. Insert handle (40)
into frame.
Then, repeat for
2nd handle.
4. Insert on/off control
bracket assembly
between the two
handles and secure
with two bolts [41]
and nuts [5].
3. Secure handles to
frame with 2 bolts
(47) and nuts (5).
Spreader Assembly
3
Tools You will Need:
Screwdriver
7/16 Wrench
Pliers
Parts You will Use:
Parts for Model:
288 Super
• (2) Drive/Idle Wheel
• (2) Handle - SS.
• (8) Nut 1/4 - 20
• (4) 1/4 - 20x1-1/2 Bolt
• (4) 1/4 - 20x2-3/4 Bolt
For Quick and Easy Assembly - First Read Entire Procedure
Then Follow Carefully The Step by Step Instructions
2
Assembly Instructions